Air Conditioning Repair Tips – Do It Yourself


Posted On Jun 22 2017 by

It might seem like a accident that your air conditioning unit fails to work only when you need it the most- during the boiling summer season. With a few fine motor skills, some technical knowledge, a bit of logical thinking and some common sense you might be able to correct some of these issues. Air conditioning installation  provide the residential installation and services to everyone.

#Issue 1: My air conditioner does not cool well.

#Solution:

This is the most common issue that every AC owner faces. Here is the list of things you can do about it. Make sure the thermostat is set to the right temperature. Check for the circuit roller. The issue could be as small as a tripped fuse. Check if the outlet’s voltage meets your AC’s requirement.

                      Image result

Switch off the AC, remove the filter and get in cleaned. A clean filter allows easy air flow. Clean the compressor and condenser unit with a damp cloth. Do not use a water faucet. Make sure that the compressor is working. If it is working you will be able to hear the outdoor compressor and the fan will be turning. If not then it is the time to call your technician.

#Issue 2: Water drips and pools around the base of my AC

#Solution:

Water formed due to condensation and it usually exits the air handler through plastic pipe or a drain tube. Dripping may be caused by a leaky pipe that needs to be replaced o a blocked pipe that needs to be cleaned.

Sometimes condensation can occur when the pump that transfers the hot air into the condenser becomes non-functional. In this case, In this case, you would need the help of a AC technician.

Last Updated on: July 19th, 2017 at 1:51 pm, by Katherine K. Vaca


Written by Katherine K. Vaca


Leave a Reply

Your email address will not be published. Required fields are marked *